reverse search

Comprehensive
Dictionary Suite
Help
Help
Help
 
across so as to pass over at an angle; in or to a crosswise position. [1/6 definitions]
angle1 to move, bend, or adjust at an angle. [2/10 definitions]
arris in architecture, the edge, ridge, or line made when two surfaces meet at an angle, as in a molding.
askew out of line; at an angle. [1/2 definitions]
bevel an instrument with an adjustable arm used for drawing angles or setting a surface at an angle. [2/3 definitions]
bevel gear a gear with teeth angled or beveled so that it meshes with another gear whose shaft is at an angle of less than 180 degrees to its own shaft.
crosscurrent a current, as in a river, that moves at an angle to the main current. [1/2 definitions]
crosswind a wind blowing at an angle across the path of an airplane, ship, or the like.
Fresnel mirrors two mirrors joined together at an angle slightly less than 180 degrees, so that a beam of light falling on them is reflected in different directions, producing interference fringes where the reflected light overlaps.
glance to strike something at an angle and be turned aside. [1/6 definitions]
inclined at an angle from a horizontal or vertical position; slanted; sloping. [1/2 definitions]
lateen of or designating a triangular sail that is hung on a long, sloping yard, which is in turn attached at an angle to a short mast. [1/2 definitions]
miter a corner or joint formed by cutting two pieces of wood at an angle and joining them. [1/4 definitions]
oblique of military march, at an angle of forty-five degrees. [1/5 definitions]
ricochet to bounce or skip off a surface at an angle; rebound. [2 definitions]
skew to turn or go off at an angle; swerve. [2/6 definitions]
toe to hammer in at an angle, as a nail or spike, or to secure or connect by hammering a nail or the like in this way. [1/7 definitions]
traverse in skiing or climbing, to descend or ascend (a mountain or hill) at an angle instead of straight up or down. [1/11 definitions]
V-type engine an automobile engine in which the cylinders are lined up in two rows that are set at an angle to each other, forming a V.